Everything about E6000 glue! http://www.landofodd
Thursday, September 18, 2008
There is a wide variation in the types of pieces called "rhinestones". Basically, rhinestones are mirror- or foil-backed pieces of clear glass crystal, glass or plastic.
Sometimes they are faceted; othertimes they are not. Some rhinestones have a flat back so they can be glued directly to the piece; others have a pointed back so they can fit into a cup or bezel. Each design element in the architecture of the rhinestone -- base material, overall shape, faceting, foil, and effect -- adds to its shine, sparkle and brilliance. The mirror or foil reflects and refracts light. Sometimes, the mirror or foil itself has a special color, effect or treatment applied to it. The clear "glass" can range from, at the most brilliant end, very-leaded glass to somewhat leaded glass to glass to acrylic at the least brilliant end. Sometimes the glass is coated with an effect or treatment.
Your goals for gluing rhinestones into a piece of jewelry or onto a piece of clothing are simple:
1. You want a bond that sticks and is durable
2. You don't want the adhesive to ruin the rhinestone
3. You want the glue to dry clear and "age" clear
4. You don't want the glue to show outside or over the edges of the stone
5. If you've gotten glue on the stone, you want to be able to get it off easily
Never use superglue with rhinestones! Superglue clouds the stone. Superglue dries like glass, so its bond shatters like glass when the bond is disturbed.
E6000, or any other brand of epoxy, works best with glass crystal and glass rhinestones, as well as gemstones. Epoxy is a plastic, and sometimes will dissolve or disturb the foils on the backs of acrylic rhinestones, although it is fine for acrylic cabochons or beads which do not have a foil backing. E6000 dries like rubber, so its bond acts like a shock absorber when the piece is hit, dropped, banged or otherwise disturbed. E6000 is great for gluing stones on cloth material, as well, and the bond will withstand several machine washings.
A rhinestone glue or Elmer's glue works OK for acrylic rhinestones.
Hot glue guns will work with the stones, but the glue doesn't age well. The bond weakens relatively quickly. The glue yellows somewhat.
When we use E6000 with rhinestones, we put a little drop of glue on the end of a pin. Then we touch the glue to the back of the rhinestone. We maneuver the pin-glue-rhinestone over the place where we want the stone to be. Then we push the rhinestone in place, and simultaneously pull the pin away from the stone. We rub the stone and around the stone with our finger or the pin to get any excess glue off. Before it dries, E6000 rubs off like rubber cement.
E-6000 is the jeweler's glue of choice, and our favorite. It is a one-part epoxy, (meaning you don't have to mix anything to make the glue -- it just comes out of a tube).
Perfect for attaching findings to base metal and costume jewelry pieces.
Also, use E-6000 on bead strands to seal end knots and to provide a strong, flexible seal that won't become brittle or damage the bead cord.
E-6000 is safe for use with virtually every type of gemstone and works on wood, leather, vinyl, and canvas.
Non-corrosive and self-leveling, E-6000 adheres in 5 to 10 minutes, and hardens to a clear, waterproof cure in 24 hours. This means you have about 10 minutes to position and reposition whatever you are gluing. If you are making jewelry, you should let the piece dry "hard" overnight, before you wear it.
We advise against using superglue for most jewelry-making projects. Superglue discolors stones.
Superglue dries like glass, so its seal shatters like glass when piece is dropped.
E6000 dries like rubber, so its seal acts like a shock absorber when a piece is dropped.
E6000 dries clear.
Two things E6000 won't do:
1. Bond two pieces of smooth glass together, like two glass disks.
2. Sometimes, it will pull the foil back away from acrylic rhinestones.
Some of our customers prefer 527 glue. This is the same product as E6000, but it has a thinner consistency, and a pointier nozzle for greater control.
High Tech Adhesives, like E6000 and Bond 527
- not water soluable
- bonds to both porous and non-porous materials
- does not bond well to rubber
- sets slowly, so you can reposition things
- dries clear